 |
NO. 702-A PREMIUM DIE CAST
BRONZE BONDING PLATE WITH 8 SQUARE INCH TINNED CONTACT AREA. THE PRESSURE TYPE CABLE CONNECTOR IS FOR CONDUCTORS THROUGH NO. 506. THIS PLATE WILL
ACCOMMODATE EITHER A "DEAD-END" OR CONTINUOUS THROUGH CABLE ROUTE. THE
TWO HOLES WILL FIT EITHER SHEET METAL SCREWS OR 1/4"MACHINE SCREWS.
NO. A702-AS ABOVE IN ALUMINUM FOR CABLES THROUGH NO. A37. NOTE: FOR NO. 507/A507 CABLE, ADD "M" TO PART NUMBERS SHOWN. |
 |
|
|
NO. 639-A PREMIUM DIE CAST
BRONZE BONDING PLATE WITH 8 SQUARE INCH CONTACT SURFACE FOR BINDING ALL
CABLES THROUGH NO. 506 TO STRUCTURAL STEE, ETC. THE UPPER BOLT HOLE IS
DRILLED AND TAPPED 1/2"-13. THE OTHER BOLT HOLES ARE FOR EITHER 1/4" OR
5/16" MACHINE SCREWS. THE VISE-GRIPE CABLE CONNECTION WITH 2" OF CONTACT
ACCEPTS CABLES THROUGH NO. 506. CONNECTOR DOES NOT ALLOW CONTINUOUS RUN-THROUGH
OF CABLE. CAN ALSO BE USED FOR CONNECTING CABLE TO 1/2" RISER BARS.
NO. A639-AS ABOVE IN ALUMINUM FOR CABLES THROUGH NO. A37. |
 |
